2022年8月18日 — Its Young's modulus is almost 2500 MPa, but its elongation at break is only 5%, making it a very rigid material. PLA vs PLA+. However, PLA+,...
作者:HS Ko · 2021 · 被引用次数:47 — Flexural modulus of PLA/PGA fiber30/HA10 increased by 14% compared to that of PLA/PGA fiber30. However, the flexural strength of PLA/PGA fiber30...
... PLA and PLA-based nanocomposites have superior flexural properties; the flexural strength and modulus of neat PLA are 63.3 MPa and 2.42 GPa, respectively.
See 'Notes' section for details. Test method. Typical value. XY (Flat). YZ (Side). Z (Up). Tensile (Young's) modulus. ASTM D3039 (1 mm / min). 3250 ± 119 MPa.3 页
Young's modulus and elastic limit increase with increasing stress speed. The deformation of the material at the elastic limit is lower. However, the resistance...7 页
作者:VC Pinto · 2015 · 被引用次数:77 — PLA has a semicrystalline structure (37% of crystallinity), is hydrophobic [4], with and high elastic modulus. (around 4.8GPa) and a glass transition...8 页
After receiving the product, we were very satisfied, got to know your company better, and found that you always adhere to the corporate philosophy of good faith, and we appreciate this attitude.
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
we were very satisfied, got to know your company better, and found that you always adhere to the corporate philosophy of good faith, and we appreciate this attitude.
This company continuously trains its employees, accumulates product production experience, continuously carries out technological innovation, and can really provide customers with excellent products.